Cribs, Cradles and Bassinets Regulations (SOR/2016-152)
Full Document:
- HTMLFull Document: Cribs, Cradles and Bassinets Regulations (Accessibility Buttons available) |
- XMLFull Document: Cribs, Cradles and Bassinets Regulations [209 KB] |
- PDFFull Document: Cribs, Cradles and Bassinets Regulations [1183 KB]
Regulations are current to 2024-10-14 and last amended on 2022-12-19. Previous Versions
SCHEDULE 1(Section 8)Test for Strength and Integrity of Slats
1 The following method is to be used for testing the strength and integrity of slats:
(a) assemble the crib, cradle, bassinet or sleep accessory according to the manufacturer’s instructions, omitting any attachments that could interfere with the conduct of the test;
(b) secure the crib, cradle, bassinet or sleep accessory in the manufacturer’s recommended use position to a horizontal surface in a manner that will not interfere with the conduct of the test;
(c) apply a torque of 8 N•m to one of the slats at its midpoint and maintain that torque for 10 seconds;
(d) record whether the slat turns or dislodges or becomes deformed or otherwise damaged;
(e) repeat the steps set out in paragraphs (c) and (d) for all the other slats;
(f) apply a vertical upward force of 500 N at the midpoint of the top rail on one of the sides to which slats are attached and maintain the force for 30 seconds;
(g) record whether any of the slats dislodge from the top or bottom rail or become damaged; and
(h) repeat the steps set out in paragraphs (f) and (g) for all the other sides to which slats are attached.
- Date modified: