Cribs, Cradles and Bassinets Regulations (SOR/2016-152)

1 The following method is to be used for testing the strength and integrity of slats:

• (a) assemble the crib, cradle, bassinet or sleep accessory according to the manufacturer’s instructions, omitting any attachments that could interfere with the conduct of the test;

• (b) secure the crib, cradle, bassinet or sleep accessory in the manufacturer’s recommended use position to a horizontal surface in a manner that will not interfere with the conduct of the test;

• (c) apply a torque of 8 N•m to one of the slats at its midpoint and maintain that torque for 10 seconds;

• (d) record whether the slat turns or dislodges or becomes deformed or otherwise damaged;

• (e) repeat the steps set out in paragraphs (c) and (d) for all the other slats;

• (f) apply a vertical upward force of 500 N at the midpoint of the top rail on one of the sides to which slats are attached and maintain the force for 30 seconds;

• (g) record whether any of the slats dislodge from the top or bottom rail or become damaged; and

• (h) repeat the steps set out in paragraphs (f) and (g) for all the other sides to which slats are attached.